Table of Contents
Advertisement
Exploded View and Parts List
2-4. Assembly
1
1) Assemble the SUB KEYPAD on UPPER as
picture below.
※ caution
1) Put the holes around 3*4 KEY on the UPPER.
3
1) After inserting the LCD FPCB in the connector,
soldering it and attach the green tape.
※ caution
1) Be careful of the scratch on the plastic.
2) Be careful of the crack on LCD FPCB.
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
2
< Bad >
1) Put the SUB PBA on the UPPER with LCD's
guide holes.
2) Insert the motor and receiver on each places.
※ caution
1) Be careful of overlap the wires.
2) Be careful of the damage of wires.
4
1) Insert the MAIN FPCB as picture below.
※ caution
1) Be careful of the crack on LCD FPCB.
2-6
< Good >
Advertisement
Table of Contents
