Inserting And Removing Memory Cards; Initializing (Formatting) Memory Cards - Polaroid PDC-800 Quick Start Manual

20 MB memory card
Still Picture mode
Still Picture & Audio mode
Continuous mode
Document mode
Audio mode

Inserting and removing memory cards

To insert a memory card, open the camera side cover. Make sure the top
surface of the card is facing upward, and insert the card into the camera in the
direction indicated on the card. Gently press the card into the slot until the
end of the card does not extend out of the slot.
To remove the memory card, open the camera side cover and slide the card
ejection lever as shown.

Initializing (formatting) memory cards

Before you can use a new memory card with the PDC-800, you must initialize
it according to the steps below. You should also initialize memory cards that
have been initialized for other devices or have been through more than 4000
record and playback cycles.
Fine
105 pictures
87
105
105
PDC-800 Quick Start – Page 20
Image quality
Normal
211 pictures
149
211
211
86 minutes 33 seconds
Economy
422 pictures
230
422
422