Preparations; Rear Connections - Philips FW-C870 User Manual

AM loop antenna
speaker
(right)
AC power cord

Rear Connections

The type plate is located at the rear of the
system.
A
Power
Before connecting the AC power cord to the
wall outlet, ensure that all other connections
have been made.
WARNING!
– For optimal performance, use only the
original power cable.
– Never make or change any connections
with the power switched on.
To avoid overheating of the system, a safety
circuit has been built in. Therefore, your
system may switch to Standby mode
automatically under extreme conditions. If
this happens, let the system cool down
before reusing it (not available for all versions).
pg 001-030/C870/37-Eng
DIGITAL SURROUND SUB-
WOOFER
OUT OUT
OUT
B
AM ANTENNA
C
AC
MAINS
~
A
B
G Position the antenna as far as possible from a TV,
9

Preparations

FM wire antenna
speaker
L R L R
(left)
AUX/CDR IN LINE OUT
FM ANTENNA 300Ω
FRONT
+
L
–
–
R
+
Antennas Connection
Connect the supplied AM loop antenna and FM
antenna to the respective terminals. Adjust the
position of the antenna for optimal reception.
AM Antenna
Fix the claw
to the slot
AM ANTENNA
VCR or other radiation source.
12/8/00, 1:55 PM
9
3139 115 20391