Change Settings; Picture - Philips HTS3251 User Manual

Play audio from home theater
Play the audio from a connected device through
your home theater.
1
Press (Home).
2
Select [Setup], and then press OK.
3
Select [EasyLink] > [System Audio
Control] > [On], and then press OK.
•
To play the audio from the TV
speakers, select [Off], and skip the
following steps.
4
Select [EasyLink] > [Audio Input Mapping],
and then press OK.
5
Follow the instructions on the TV to map
the audio of the connected device to the
audio inputs on your home theater.
Note
•
If you connect your home theater to the TV
through an HDMI ARC connection, make sure
that the TV audio is mapped to the ARC input
on your home theater.
6

Change settings

This section helps you to change the settings of
your home theater.
Caution
•
Most of the settings are already configured
with the best value for your home theater.
Unless you have a reason to change a setting, it
is best to leave it at the default value.
Note
•
You cannot change a setting that is grayed out.
•
To return to the previous menu, press
BACK. To exit the menu, press

Picture

Change the picture settings to suit your
preferences.
Note
•
The best setting is automatically selected for
the TV. If you change the setting, make sure
that the TV supports the new settings.
Picture settings and format
1
Press (Home).
2
Select [Setup], and then press OK.
3
Select [Video], and then press OK.
4
Change the following settings, and then
press OK:
• [TV Display]: Picture format.
•
[Picture Settings]: Predefined color
settings.
(Home).
EN
21