Display Screen Selection; Dim Mode; Clock Display Mode; Information Display - Philips MC-90 User Manual

Display screen selection

Dim mode

You can select the desired brightness for the
display.
Press DIM on the remote control repeatedly to
select DIM 1, DIM 2, DIM 3 or DIM OFF display
mode.
is shown, except for DIM OFF mode.
DIM
DIM LEDs
mode
OFF
on
1
partially on
2
off
3
off

Clock display mode

The clock will always appear on the display
regardless of any source mode (except Eco
Power standby and demonstration mode).
Press CLOCK/TIMER (or CLOCK on the
remote control) once.
The clock is displayed. If the clock has not
been set, "--:--" is displayed.
To return to normal display mode, press
CLOCK/TIMER again.
Note:
– If you pressed any keys in clock display mode,
the display will briefly show the information related
to the selected mode.
– If you pressed CLOCK/TIMER while in recording
or menu modes, the clock display will only show for
a few seconds.
pg 001-038/MC90/22-Eng
Brightness Music level
bar
normal active
normal off
normal off
half
off
+ music level bar
17
Basic Functions

Information display

Press DISPLAY.
During playback, stop or recording;
To view various track's/disc's time information.

Volume control

Adjust the MASTER VOLUME to increase
(turn knob clockwise or press VOLUME +) or
decrease (turn knob anti-clockwise or press
VOLUME -) the sound level.
The current volume level is displayed. When
reached the minimum volume level,
"VOL MUTE" is displayed.
To listen through the headphones
Connect the headphones plug to the
n socket at the front of the system.
The speakers will be muted.
To switch off the volume temporarily
Press MUTE on the remote control.
Playback will continue without sound and
"MUTE" is displayed.
To restore the volume, press MUTE again or
increase the volume level.
1/29/02, 6:37 PM
17
3139 115 20972