Samsung SGH-P520 Service Manual page 31

7-2. Assembly
1
1) Insert the LCD-FPCB into the connecter holding
the PBA tilted to one side.
※ caution
1) Confirm the silk-line after the insertion.
3
1) Assemble the PBA and the front ass'y aligning
remarked points.
Put the key-
FPCB under the
PBA.
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
2
1) Attach a tape on the LCD-connecter like a
picture.
4
1) Tighten two screws.
2) Attach the key-FPCB to the connecter.
※ caution
1) Confirm which the key-FPCB and the PBA are
connected surely.
7-3
Exploded View and Parts List