Setting Up The Tv With Your Pc; Sound Control; Configuring The Sound Menu - Samsung 5 series User Manual

Setting up the TV with your PC

¦
Preset: Press the SOURCE button to select PC mode.
N
Auto Adjustment
❑
Auto Adjustment allows the PC screen of set to self-adjust to the incoming PC video signal. The
values of fine, coarse and position are adjusted automatically.
Press the TOOLS button to display the Tools menu. You can also set the Auto Adjustment
T
by selecting Tools → Auto Adjustment.
This function does not work in DVI-HDMI mode.
N
Screen
❑
Coarse / Fine

The purpose of picture quality adjustment is to remove or reduce picture noise. If the noise is
not removed by Fine-tuning alone, then adjust the frequency as best as possible (Coarse) and Fine-tune again. After the noise has
been reduced, readjust the picture so that it is aligned on the center of screen.
PC Position

Adjust the PC's screen positioning if it does not fit the TV screen. Press the ▲ or ▼ button to adjusting the Vertical-Position. Press
the ◄ or ► button to adjust the Horizontal-Position.
Image Reset

You can replace all image settings with the factory default values.

SOUND CONTROL

Configuring the Sound Menu
¦
Mode → Standard / Music / Movie / Clear Voice / Custom
❑
You can select a sound mode to suit your personal preferences.
Press the TOOLS button to display the Tools menu. You can also configure the sound
T
mode by selecting Tools → Sound Mode.
Equalizer
❑
The sound settings can be adjusted to suit your personal preferences.
Mode

You can select a sound mode to suit your personal preferences.
Balance

Controls the balance between the right and left speakers.
00Hz / 00Hz / KHz / KHz / 0KHz (Bandwidth Adjustment)

To adjust the level of different bandwidth frequencies
Reset

Resets the equalizer settings to the default values.
SRS TruSurround HD → Off / On
❑
SRS TruSurround HD is a patented SRS technology that solves the problem of playing 5.1 multichannel content over two
speakers. TruSurround delivers a compelling, virtual surround sound experience through any two-speaker playback system,
including internal television speakers. It is fully compatible with all multichannel formats.
Audio Language
❑
You can change the default value for audio languages. Displays the language information for the incoming stream.
While viewing a digital channel, this function can be selected.
N
You can only select the language among the actual languages being broadcast.
N
[550_Aus]BN68-01895D-02Eng.indb 16
(digital channels only)
English - 
Brightness : 45
Sharpness : 50
Auto Adjustment ►
Screen
Advanced Settings
Picture Options
Picture Reset
Mode : Custom ►
Equalizer
SRS TruSurround HD : Off
Audio Language : - - -
Audio Format : - - -
Audio Description
Auto Volume : Off
Speaker Select
2009-09-16 11:12:44