Samsung ME32B User Manual page 190

11
Troubleshooting Guide
The power LED is off. The screen will not
switch on.
"No Signal" is displayed on the screen (refer to
"Connecting to a PC").
"Not Optimum
The images on the screen look distorted.
The screen is not clear. The screen is blurry.
The screen appears unstable and shaky.
There are shadows or ghost images left on the
screen.
The screen is too bright. The screen is too
dark.
Screen color is inconsistent.
The colors on the screen have a shadow and
are distorted.
White does not really look white.
There is no image on the screen and the power
LED blinks every 0.5 to 1 second.
Mode" is displayed.
Screen issue
Make sure that the power cord is connected.
("2.2 Connecting and Using a PC")
Check that the product is connected correctly with a
cable
("2.2 Connecting and Using a PC")
Check that the device connected to the product is
powered on.
This message is displayed when a signal from the
graphics card exceeds the product's maximum
resolution and frequency.
Refer to the Standard Signal Mode Table and set the
maximum resolution and frequency according to the
product specifications.
Check the cable connection to the product
("2.2 Connecting and Using a PC")
Adjust Coarse and Fine.
Remove any accessories (video extension cable, etc)
and try again.
Set the resolution and frequency to the
recommended level.
Check that the resolution and frequency of the PC
and graphics card are set within a range compatible
with the product. Then, change the screen settings if
required by referring to the Additional Information on
the product menu and the Standard Signal Mode
Table.
Adjust Brightness and Contrast.
Go to Picture and adjust the
settings.
Go to Picture and adjust the
settings.
Go to Picture and adjust the
settings.
The product is in power-saving mode.
Press any key on the keyboard or move the mouse
to return to the previous screen.
11 Troubleshooting Guide
Colo(u)r Temp.
Colo(u)r Temp.
Colo(u)r Temp.
190