Table of Contents
Advertisement
Disassembly and Assembly instructions
5
1) Pull out the receiver and the motor
connector first. the LCD connector and the
key connector later.
7
1) Get rid of the screw in the A red circle.
You can lift the shield frame with pushing out
three hooks slightly.
9
...
1) Insert tweezers between the bottom of the
motor and the frame to the direction that the
red arrow directs.
This Document can not be used without Samsung's authorization
SAMSUNG Proprietary-Contents may change without notice
6
1) Push out two red circled hooks slightly to
lift the PBA.
8
1) Remove the sponge on the LCD connector
first, then you can detach the LCD from the
frame.
10
1) Take off the KEY FPCB with care not to
damage KEY FPCB.
6-2
Advertisement
Table of Contents
