Table of Contents
Advertisement
Disassembly and Assembly instructions
9
1) Following silk line, post 2 electric
conduction TAPE, please fold TAPE
following silk line .
※ caution
1) Do not go over MAIN LCD part.
2) Do not touch to insulation TAPE.
3) Be careful strange material or finger mark.
■ LCD using consideration
- Please do not touch LCD both sides. (Seize side part )
×
- please don't give any impact to LCD ( finger or pincette)
- When you seize the corner of LCD , please don't give too much force.
- please don't touch LCD FPCB part.
- if there are any kinds of stain/air bubble/bow/dust, rinse LCD surface with Alcohol
and cotton stick.
- if there are any strange spots in LCD surface , please don't use those LCD.
those LCD are faulty LCD
- if there are any kinds of tear/split/demage/short in FPCB, please don't
use those LCD.
This Document can not be used without Samsung's authorization
○
SAMSUNG Proprietary-Contents may change without notice
10
1) Post 2 sponge PORON following below
blue line.
※ caution
1) Be careful strange material or finger mark.
6-8
Advertisement
Table of Contents
