Table of Contents
Advertisement
8-2. Assembly
1
1) Connect Camera module to LCD.
1) Be careful not to make scratch and molding damage!
1)Insert FPCB into FOLDER LOWER.
3
Arrange Wires clearly on
SPEAKER and MOTOR !
1) When inserted FPCB, Arrange Wires clearly as above
picture is shown.
This Document can not be used without Samsung's authorization
SAMSUNG Proprietary-Contents may change without notice
Disassembly and Assembly instructions
1) Insert FPCB into FOLDER LOWER.
2
2) Insert Camera module[Pushing right
direction as the above picture is shown]
when the Connector is fixed.
The Connector must be fixed.
Pushing Direction
1) Be careful not to make scratch and molding damage!
2) Be careful not to damage LCD FPCB!
1) Assemble FOLDER UPPER with FOLDER LOWER
4
following the orders as above picture is
shown.
1) Be careful not to make scratch and molding damage!
8-3
1
3
4
2
Advertisement
Table of Contents
