6. Disassembly and Assembly instructions
6-1. Disassembly
1
1) Remove SCREW CAP
2) release the screws(4 point)
※ caution
1) Handle with care. No scratch
3
1) Press the rear sim connector Hook side
with the dismantle tool to release the
locker
※ caution
1) Handle with care. No scratch
2) Handle the HOOK with care, and check No
bending the board and front/rear cover
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
2
1) Press the Rear Camera Hook side with the
dismantle tool to release the locker
※ caution
1) Handle the HOOK with care, and check No
bending the board and front/rear cover
4
1) Press the Rear volume key side (upper and
lower) with the dismantle tool to release
the locker
2) Open the rear cover
※ caution
1) Handle with care. No scratch
2) Handle the HOOK with care, and check No
bending the board and front/rear cover
6-1
-Please use dismantle
tool to open
-REAR case is too
soft to be broken