Table of Contents
Advertisement
5
1) Remove SHIELD CAN and KEY PAD from the FOLDER ASS"Y.
1) Disjoint KEYPAD and SHIELD CAN together.
7
1) Using a disassemble stick, Disjoint the Folder like the Photo.
1) When you disjoint the Folder, pay attention to damage
of the LCD F-PCB.
2) When you use a disassemble stick, Be careful a damage
of component.
9
1) Disjoint the Folder of the Bottom with tweezers.
2) Using a disassemble stick, disjoint the Folder of the Side.
1) When disjointing UPPER, pay attention to damage of
the wire.
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
6
1) Remove conduction Tape and Rubber from the FOLDER
ASS'Y with tweezers.
8
1) After remove screw cap with tweezers, Unscrew.
1) When you use a screwdriver, Be careful a damage
of component.
10
1) Romove the LCD PROTECTION TAPE with tweezers
1) Pay attention to a finger mark and dust of the LCD.
2) When you use tweezers, Be careful a damage of
component.
3-5
Exploded view and Part List
Advertisement
Table of Contents
