Samsung SGH-F210 Service Manual page 39

9
※ caution
1. According to the hinge shape, combine the front
upper part as shown.
11
1) check the MIC as shown.
2) Check the position of MIC, again.
※ caution
1. Land the MIC on the desired position, exactly
2. Turning PBA up to 90 degree, insert FPCB
into the hole.
3. Land PBA as shown.
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
10
※ caution
1. Align the front and the lower by means of
swinging to the counter clock wise.
12
1) Align the hole of housing and the hole of PBA.
2) When combining the connectors, be cautious not
to damage the pin of each connector.
※ caution
1. Land the camera housing according to the guide
hole.
2. Fasten the screw at the camera housing.
3. At the upper part, combine the main connector.
4. Combine the 3*4 key connector at the lower
part.
5. After landing camera at the housing, combine the
connector.
7-7
Exploded View and Parts List