Table of Contents
Advertisement
Exploded View and Parts List
5-3. Disassembly
1
Unscrew 4 places of the Rear.
※ caution
1) Attention, Avoid scratching
2) using the star driver
3
②
①
1) After remove the green tape, disassemble the 3*4 connector
2) After disassemble the CAM KEY FPCB using tweezers,
3*4 key FPCB is located in CAM KEY FPCB behind.
3) Disassemble VOL KEY FPCB using tweezers.
4) Disassemble INTENNA WIRE using tweezers.
5) Softly lift the CAMERA using tweezers.
※ caution
1) When moving the position of the 3*4 KEY CONNECTOR FPCB and CAM KEY FPCB,
attention for the FPCB not to be damaged,
2) When disassembling INTENA WIRE, attention for the end of the WIRE not to be bend.
This Document can not be used without Samsung's authorization
⑤
SAMSUNG Proprietary-Contents may change without notice
2
1) Open the lower part of Rear using stick for
disassembly. And With the picture it
disassemble in same order (And
disassemble in order such as the picture)
※ caution
1) Attention, Avoid scratching
④
5-4
③
Advertisement
Table of Contents
