Setting Up The Network; Network Setup - Samsung 6 series User Manual

Advanced Features

Setting up the Network

Network Type (Wired / Wireless)
Select Wired or Wireless to connect to the network.
✎
Wireless is activated only if the "Samsung Wireless
LAN Adapter" is connected.

Network Setup

■ Wired Network Setup: (when Network Type is set to
Wired)
✎
Please check if the LAN cable is connected.
Network Setup
Internet Protocol Setup
IP Address
Subnet Mask
Gateway
DNS
DNS Server
Wired Network Setup (Auto / Manual)
If you connect the LAN cable and it supports DHCP,
you can set Internet Protocol Setup to Auto. If the
LAN supports a static IP address, you must set Internet
Protocol Setup to Manual.
1. Set Network Type to Wired.
2. Select Network Setup.
x
Set Internet Protocol Setup and DNS Server
to Auto or Manual. If you set to Manual,
you can set up IP Address, Subnet Mask,
Gateway and DNS Server manually by
pressing number buttons on the remote control.
3. Select Network Test to check the network
connectivity.
24
English
: Auto ►
:
:
:
: Auto
:
U Move E Enter R Return
■ Wireless Network Setup
✎
The menu is activated only if the "Samsung
Wireless LAN Adapter" is connected.
Select a network
– Access Point: You can select the IP sharer to use
when using a wireless network.
✎
NOTE
x
If a wireless Access Point is not in the Access
Point list, press the Red button.
x
When the connection is made, you will be
returned to the screen automatically.
x
If you have selected an Access Point with
a security authentication: The Security Key
input screen appears. Enter the security key
and press the Blue button on the remote
control.
x
If security encryption type is WEP, 0~9 and
A~F will be available when you input security
key.
Connecting WPS (Wi-Fi Protected Setup)
– If Security Key is already set: In access point list,
select WPS.
✎
You can select PBC, PIN, Security Key.
Connecting by using PBC: Select a PBC (Push
Button Configuration). Press the PBC button on
the AP (Access Point) within 2minutes, and wait for
connection.
Connecting by using PIN: Select a PIN (Personal
Identification Number).
✎
The message showing the PIN Code is
displayed. Input the PIN Code at AP device
within 2minutes. Select OK and wait for
connection.
✎
Try again if connecting operation doesn't work.
✎
When the connection is not established
although tried again, reset the access point.
Please refer to a manual of each access point.
Connecting by using Security Key: When selecting
Security Key, the input window is displayed. Input
the security key and press the Blue button.
✎
Try again if connecting operation doesn't work.
– If Security Key is not set: When the security setting
of AP that supports WPS is NONE, you can select
PBC, PIN, None Security. None Security is capable
of connecting to AP directly without using the WPS
function.
✎
Process for PBC, PIN is same as above. Refer
to "If Security Key is already set."
✎
Try again if connecting operation doesn't work.