Samsung YP-GB70 User Manual page 122

Specific Absorption Rate (SAR) certification
information
THIS DEVICE MEETS INTERNATIONAL GUIDELINES FOR
EXPOSURE TO RADIO WAVES
Your mobile device is a radio transmitter and receiver. It is designed
not to exceed the limits for exposure to radio waves (radio frequency
electromagnetic fields) recommended by international guidelines. The
guidelines were developed by an independent scientific organisation
(ICNIRP) and include a substantial safety margin designed to assure the
safety of all persons, regardless of age and health.
The radio wave exposure guidelines use a unit of measurement known as
the Specific Absorption Rate, or SAR. The SAR limit for mobile devices is
2.0 W/kg. Tests for SAR are conducted using standard operating positions
with the device transmitting at its highest certified power level in all
tested frequency bands
122
Safety precautions
The highest SAR values under the ICNIRP guidelines for this device model
are:
Maximum SAR for this model and conditions under which it was
recorded
Head SAR
Body-worn SAR
During use, the actual SAR values for this device are usually well below
the values stated above. This is because, for purposes of system efficiency
and to minimise interference on the network, the operating power of
your mobile device is automatically decreased when full power is not
needed for the call. The lower the power output of the device, the lower
its SAR value.
A body-worn SAR test has been performed on this device with an
approved accessory or at a separation distance of 1.5 cm. To meet RF
exposure guidelines during body-worn operation, the device must be
used with the approved accessory or positioned at least 1.5 cm away from
the body. If you use an unapproved accessory, ensure that the accessory
does not contain any metal components and that it positions the device
at least 1.5 cm away from the body.
0.077 W/kg
0.153 W/kg