General Setup; Tv Aspect Ratio; Angle Viewing; Note : This Equipment Has Been Tested And Found To Comply With The Limits For Osd Language - Power Acoustik HDVD-9BK Owner's Manual

DVD Functions
Stop( )
[DVD]/[AUDIO]
In DVD mode, Press STOP to stop playback.
To resume playback, press PLAY/PAUSE. If
you press STOP and then PLAY/PAUSE twice,
the player will begin playback at the first
scene of the movie.
[MP3]
In MP3 mode, Pressing STOP will stop the
audio playback. Press PLAY/PAUSE to begin
playback of the first title on the disc.
Arrows( / / / )
[DVD]
In addition to navigating the various menus, you can use the arrow buttons to define the area
of the screen you want to enlarge in ZOOM mode.
[MP3]
After pressing STOP button, select the desired folder and set the condition by pressing
ENTER button.
Setup
Pressing the SETUP button opens the Setup Menu, where you can make and adjust DVD
settings to suit your equipment and preferences.
Menu
[DVD]
Pressing the SETUP brings up the DVD disc menu. The content of this menu varies,
depending on the programming of the disc.
OSD CONDITION
1 Time Press Play Key To Continue Stop
2 Time
Disc Stop
OSD CONDITION
1 Time Stop Stop
26
DVD Setup

General Setup

1. TV Aspect Ratio

In the Setup function called TV Display, you set the player to output the video signal at the
same aspect ratio as your monitor. If the monitor is widescreen format, select WIDE.
If it is as normal screen (4:3), choose NORMAL/PS (Pan and Scan) or NORMAL L/B
(Letterbox).
Normal / PS 4:3 PAN SCAN
Choose this setting if you want the movie to fill the entire screen.
(This might mean that the left and right edges won t be seen)
Normal / LB 4:3
Choose this setting if you want to see the movie in its original aspect ratio.
(The movie might appear with black bars at the top and bottom of the screen.)
Wide 16:9 WIDE SCREEN
Choose this setting if your DVD Player is connected to a widescreen TV.
(This opition is available only if the disc has a 16:9 display aspect ratio.)

2. Angle Viewing

Some DVD discs contain programming which allows you
to view a scene from a few different camera angles. You
can tell when a scene is so recorded when an Angle Mark
is displayed on the screen. This mark will only appear if you
have enabled the Angle Mark feature
in the DVD Setup menu.
On: When selected, the screen will be shown with
angle mark.
Off: When selected, no angle mark is shown on
the screen.
3. OSD Language
Use this option to set the OSD language.
When selected, change to set the on-screen display
language.
General Setup Page General Setup Page
TV Display TV Display PS Normal/PS
Angle Mark Angle Mark On Normal/LB
OSD Lang OSD Lang ENG Wide
Screen Saver Screen Saver On
Set TV Display Mode Set TV Display Mode
General Setup Page General Setup Page
TV Display TV Display PS
Angle Mark Angle Mark On On
OSD Lang OSD Lang ENG Off
Screen Saver Screen Saver On
Set Angle Mark Set Angle Mark
General Setup Page General Setup Page
English English
TV Display TV Display PS
Korean Korean
Angle Mark Angle Mark On
OSD Lang OSD Lang ENG French French
Screen Saver Screen Saver On German German
Italian Italian
Spanish Spanish
Portuguese Portuguese
Dutch Dutch
Set OSD Language Set OSD Language
15