Olympus TG-625 Instruction Manual page 32

To individually select and erase images To individually select and erase images
q [Sel. Image] q
[Sel. Image]
1 Use FG to select [Sel. Image], and press the
A button.
2 Use FGHI to select the image to be erased, and
press the A button to add a R mark to the image.
●
Press to the T end to return to the single frame
display.
R mark
3 Repeat Step 2 to select the images to be erased,
and then press the  button to erase the selected
images.
4 Use FG to select [Yes], and press the A button.
● The images with a R mark are erased.
To erase all images [All Erase] To erase all images [All Erase]
1 Use FG to select [All Erase], and press the
A button.
2 Use FG to select [Yes], and press the A button.
32 EN
OK
Sel. Image (1)
4/30 4/30
MENU
Erase/Cancel
Saving print settings to the image data Saving print settings to the image data
q [Print Order] q
[Print Order]
"Print Reservations" (p. 46)
Print reservation can be set only for still images that
are recorded to the card.
Protecting images q
Protecting images
Protected images cannot be erased by [Erase] (p. 18,
31), [Sel. Image] (p. 31), [Erase Group] (p. 31), or [All
Erase] (p. 31), but all images are erased by [Memory
Format]/[Format] (p. 33).
1 Use HI to select an image.
2 Press the A button.
● Press the A button again to cancel the settings.
3 If necessary, repeat Steps 1 and 2 to protect other
images, and press the  button.
Setting images to upload to Internet Setting images to upload to Internet
using OLYMPUS Viewer 2 using OLYMPUS Viewer 2
q [Upload Order] q
[Upload Order]
1 Use HI to select an image.
2 Press the A button.
Press the A button again to cancel the settings.
●
3 If necessary, repeat Steps 1 and 2 to make settings
for other images, and press the  button.
Only JPEG fi les can be ordered.
For details on OLYMPUS Viewer 2, refer to "Installing
the PC software and registering user" (p. 41).
For details on uploading images, refer to OLYMPUS
Viewer 2 "Help".
q [ [R R ] ]