Configuring Camera Sound Settings; Time Stamping Snapshots - Casio EXILIM EX-TR200 User Manual

Configuring Camera Sound Settings (Sounds)
Procedure
MENU * Setup * Sounds
Startup
Half Shutter
Shutter
Operation
Operation
Vol
Volume
Playback
Vol
• Setting a volume level of 0 mutes output.
Time Stamping Snapshots (Timestamp)
Procedure
MENU * Setup * Timestamp
You can configure the camera to stamp the recording date only, or date and time in
the lower right corner of each snapshot.
• Once date and time information is stamped into a snapshot, it cannot be edited or
deleted.
Example: July 10, 2015, 1:25 p.m.
Date
Date&Time
Off
• Even if you do not stamp the date and/or time with Timestamp, you can do so later
using some printing application.
• Stamping is performed in accordance with the date and time settings (page 97) and
the display style settings (page 98).
Toggles the operation tone between on and off.
Specifies the sound volume. This volume setting is also
used during video output (from the HDMI port) (page 71).
Specifies the volume of movie audio output. This volume
setting is also used during video output (from the HDMI
port) (page 71).
2015/7/10
2015/7/10 1:25pm
No stamping of date and/or time
95
Other Settings (Set Up)