Connecting To Bluetooth Devices; Connecting To A Computer - Alcatel One Touch Snap 7025 User Manual

Labs
Quick controls
• Mark to enable quick controls.
• Full screen Mark to use the full screen mode.
6.3

Connecting to Bluetooth devices

Bluetooth is a short-range wireless communication technology that you
can use to exchange data, or connect to other Bluetooth devices for
various uses.
To access this function, drag down notification panel and touch
access Settings. Then touch Bluetooth, your device and other available
ones will show on the screen.
To turn on Bluetooth
• Drag down notification panel and touch
• Touch to activate/deactivate this function.
To make your phone more recognizable, you can change your phone name
which is visible to others.
• Drag down notification panel and touch
• Touch Bluetooth.
• Touch and hold the Menu key and touch Rename phone.
• Enter a name, and touch Rename to confirm.
To make device visible
• Drag down notification panel and touch
You are recommended to use ALCATEL ONE TOUCH Bluetooth headsets,
(1)
which have been tested and proved compatible with phone. You can go
to www.alcatelonetouch.com for more information about ALCATEL ONE
TOUCH Bluetooth headset.
(1)
to access Settings.
to access Settings.
to access Settings.
85
• Touch Bluetooth.
• Touch your device to make it visible or invisible.
• Touch and hold the
the visible time.
To pair/connect your phone with a Bluetooth device
To exchange data with another device, you need to turn Bluetooth on
and pair your phone with the Bluetooth device with which you want to
exchange data.
• Drag down notification panel and touch
to
Bluetooth
• Touch
• Touch SEARCH FOR DEVICES
• Touch a Bluetooth device you want to be paired with in the list.
• A dialog will popup, touch
• If the pairing is successful, your phone connects to the device.
To disconnect/unpair from a Bluetooth device
• Touch the Settings icon
Unpair to confirm.
• Touch
6.4

Connecting to a computer

With the USB cable, you can transfer media files and other files between
micro SD card/internal storage and computer.
Before using MTP or PTP you should firstly mark USB debugging.
• To access this function, touch
Build number 7 times. Now you may touch Settings\Developer
options\USB debugging.
Menu key and touch Visibility timeout to select
to access Settings.
Pair to confirm.
beside the device you want to unpair.
Settings\About phone, then touch
86