Switching On/Off; Standby Mode - Philips TCD308/4P Instructions For Use Manual

Basic functions
Press
Type your PIN code if activated and press OK
If you enter the wrong PIN code 3 times,
! !
your SIM card will be blocked.
You must then enter the PUK code provided by
your service provider (10 wrong PUK codes ente-
red will totally block your SIM card. Contact your
service provider).
Press and hold
After being switched on, your phone goes to standby
mode.Your phone is ready to use.The display is as follows:
network to which
you are connected
battery charge status (max. : 4 bars).
your phone is registered with a network.
quality of reception (max. : 4 bars).
If the
network is not currently available. Move to a
! !
different location.
In this guide: operations started from standby
mode are marked
during a call are marked
to switch your phone on.
to switch your phone off.
and the

Switching on/off

Standby mode

"Network name"
Menu
are not displayed, the
. Operations
.
9
Names
started