Remote Control Keys - Philips 21PT5606/01 User Manual

Remote control keys

Screen information / permanent no.
To display / clear the program number,
name (if it exists), time, audio mode and
time remaining for the sleep feature.
Press the key for 5 seconds to activate
permanent display of the number.This
key is also used to exit from the menu.
Surround Sound (only available
on certain versions). To activate /
deactivate the surround sound
effect. In stereo, this gives the
impression that the speakers are
further apart. For models equipped
with Virtual Dolby Surround*, you
can experience Dolby Surround
Pro Logic sound effects. In mono, a
stereo spatial effect is simulated.
VCR key *
Pre-set sound
Used to access a series of stored
settings: ,
Speech Music
and return to
To call up or exit the menus.
Cursor / Format 16:9
These 4 keys are used to navigate
through the menus.The
keys are used to enlarge or
compress the picture vertically.
To adjust the sound level
To mute or restore the sound.
Number keys
Direct access to the programmes.
For a 2 digit program, enter the
2nd digit before the dash
Selection of EXT socket
Press several times to select
EXT1, EXT2, S-VHS and AV.
* "Dolby" and the double-D symbols
are trademarks of the Dolby
Laboratories Licensing Corporation.
Manufactured under license of Dolby
Laboratories Licensing Corporation.
* VCR key
The remote control lets you control the main functions of the VCR.
Press and hold down the VCR key located on the side of the remote control, then press one of the keys to access
b
the VCR functions:
The remote control is compatible with all VCRs using the RC5 standard.
,
Theatre
.
Personal
Menu
îÏ
Volume
Mute
disappears.
£
H îÏ È¬
% ∫
@# · ¢ Ê Æ 09
P
Radio / TV mode
To switch the TV set to radio or
TV mode (for versions equipped
with radio).
Standby
Lets you place the TV set on
standby.To turn on the TV, press
@ @ b 0 9
, , to (or
P
Teletext keys (p. 8), VCR keys
(p.11) and list of radio stations
(p. 5)
Sleep
To select an automatic standby after a
preset time (from 0 to 240 minutes).
To enlarge or compress the
picture vertically
Pre-set image
Used to access a series of stored
settings: , ,
Bright Natural Soft
and return to
Multimedia
Teletext (p. 8)
Program selection
To access the next or previous
programme.The number, (name)
and sound mode are displayed for
a few moments.
For some programs, the title of the
program will be displayed at the
bottom of the screen.
Teletext keys (p.8)
or VCR keys *
Sound mode (only available on
stereo versions)
Used to force programmes in
to or, for bilingual
Stereo Mono
programs, to choose between
or . For TV sets equipped
I Dual II
for Nicam reception, depending on
the programmes, you can force the
sound to
Stereo Nicam
select between
Nicam Dual I
and
Nicam Dual II Mono
The indication is red when in
Mono
forced position.
Â
).
ı
,
.
Personal
Dual
or
Mono
,
.
3