Table of Contents
Advertisement
MOUNTING
The MST65 is designed to be mounted in several different ways so that it can
be installed in the most convenient position. Although the MST65 is water
resistant when the front cover is closed, care should be taken to locate it
where it will not be subjected to spray or rain. Figure 1 shows the various
methods of mounting available.
Figure 1. Upright or Overhead Mounting
Upright or Overhead Mounting
1. Attach the two gimbal knobs and self-adhesive rubber washers to the
MST65 and slide the unit into the mounting bracket. Ensure the rubber
washers are between the bracket and the radio. Tighten the knobs firmly.
2. Temporarily position the MST65 in the desired location, tilting the radio in
the bracket to ensure you are able to get the required adjustments for
viewing angle etc.
MST65
INSTALLATION
Owner's Manual
2808
Page 3
Advertisement
Table of Contents
