Voice Scrambler - Standard Communications Horizon HX255S Owner's Manual

4.16 VOICE SCRAMBLER

If private communication is desired, a CVS240 voice scrambler can be
installed to the transceiver. Contact your SCC dealer or SCC factory to
have the voice scrambler installed and programmed for your transceiver.
With a voice scrambler installed in the transceiver, channels to be
scrambled can be programmed as follows:
1. Hold down the WX key and turn on the transceiver. The display
shows:
2. Hold down the WX key and press the
scrambler code. Any number from 00 to 127 can be selected as
the scrambler code but all channels to be scrambled must have the
same code. The display shows:
3. Select the channel to be scrambled by pressing the
key. The display shows:
4. Press the MEM key to store the channel to be scrambled in the
transceiver's memory. The display shows the following with a "M"
displayed.
5. If the channel was entered incorrectly, delete the channel from
memory by pressing the CLR key, "M" disappears. To change the
scrambler code, repeat step 2.
Page 14
C
U I
U I C
U I C
C
U I
M
Owner's Manual
or key to set the
or
HX255S