Operating Battery Charge System - Standard Communications Horizon HX150S Owner's Manual

To install the "AA" size alkaline cell batteries
Confirm the location and polarity of the battery (or alkaline cell) when
installing the battery.
Remove the battery (or alkaline cells) if the transceiver is not used for
long periods.

5.3 OPERATING BATTERY CHARGE SYSTEM

1. Plug the end of CWC231 wall charger to the DC IN connector of the
CBT300.
2. Plug the wall charger into a 120 VAC wall outlet.
3. Turn the transceiver off.
4. Insert the transceiver. The indicator lights, and charging begins.
5. Remove the battery pack from charge adapter when charging time has
passed.
Never plug a power supply into the CBT300 other than the CWC231.
page 14
1. Install the battery cells on the bottom
side, paying close attention to the
battery polarity markings on the tray.
2. Attach the clamper to battery tray.
3. Install the battery cells on the top side.
CAUTION
NOTE
CAUTION
Owner's Manual HX150S