Clock/Timer; View Clock; Clock Setting; Timer Setting - Philips FW-C100 User Manual

MINI HIFI SYSTEM
STANDBY-ON
CD1 • 2 • 3
DSC

View Clock

You can view the clock (if it is set) if the system
is in Standby mode or when any sound source is
selected (CD, TUNER, etc.). The clock will be
displayed for about seven seconds.
¶ Press CLOCK•TIMER briefly (on the system
only).
➜ "10:38 or 22:38" (the current time)
PM
will be displayed depending on whether you
have selected 12- or 24-hour mode.
➜ "--:--" will be displayed if the clock is not
set.

Clock Setting

The clock can be set in either 12- or 24-hour
mode, e.g. "12:00
AM
setting the clock, you must be in the View Clock
mode.
1
Press CLOCK•TIMER to select clock mode.
2
Press PROGRAM to select 12- and 24- hour
mode.
➜ If 12-hour mode is selected, "12:00" starts
flashing and the lights up.
AM
➜ If 24-hour mode is selected, "00:00" starts
flashing.
3
Set the hour with à or á on the system.
4
Set the minute with í or ëon the system.
5
Press CLOCK•TIMER again to store the
setting.
➜ The clock starts.
¶ To exit without storing the setting, press Çon
the system.
pg 01-27/C100/21-Eng
BAND TAPE 1 • 2
CD TUNER TAPE
L
TUNING DEMO STOP PRESET
PLAY• PAUSE PREV NEXT
SEARCH STOP• CLEAR
•
PROGRAM CLOCK TIMER DYNAMIC BASS BOOST
DIGITAL SOUND CONTROL
" or "00:00". Before
23

Clock/Timer

•
3 CD ROTARY CHANGER SYSTEM
•
CD REWRITABLE COMPATIBLE
•
CD SYNCHRO RECORDING
MASTER
VIDEO
VOLUME
AUX
L
Notes:
– During clock setting, if no button is pressed
within 90 seconds, the system will exit clock setting
mode automatically.
– When a power interruption occurs, the clock
setting is erased.

Timer Setting

¶ The system can switch on to CD or TUNER
mode automatically at a preset time. It can serve
as an alarm to wake you up.
¶ Before setting the timer, make sure the clock is
set correctly.
¶ The timer will always be switched on once it is
set.
¶ The volume of the timer will increase
from the minimum level to the most
recently selected volume level.
1
Press and hold CLOCK•TIMER for more than
2 seconds to select timer mode.
➜ "TU__XX:XX" or "CD__XX:XX" starts
flashing. "XX:XX" is "12:00
the last timer setting, depending on whether 12-
or 24-hour mode has been selected.
➜ The
starts flashing.
TIMER
2
Press CD or TUNER to select the desired
source.
➜ "TU__XX:XX" indicates the Tuner mode is
selected.
➜ "CD__XX:XX" indicated the CD mode is
selected.
¶ Before selecting CD, make sure a disc is loaded
in the CD changer tray.
29/05/2001, 09:57 AM
2
CD TAPE 1/2 TUNER
DIM AUX SLEEP
CD DIRECT
1 2 3
PAUSE
REPEAT SHUFFLE
Å
VOLUME
É
í ë
Ç
à á
MUTE
DSC DBB
" or "00:00" or
AM
23
3139 115 20361