Haier HWF5300 User Manual page 14

English
the cycle chosen. All selections are not available in all cycles.
Water level (6)
• Water levels may be set at the beginning of the wash or in pause mode.
• During Soak, Wash or Rinse, press this button to manually replenish water.
Release for the water to stop. Function automatically is inactive when water
reaches the overflow protection level.
Signal (7)
• Signal volume can be adjusted soft–loud or off.
Soil level (8)
• Select clothes soil level. There are 4 levels to choose from, Extra Heavy,
Heavy, Medium and Light.
• Wash cycle increases 2 minutes for each level increased. Selection should be
based on the soil level in clothes. The dirtier the clothes the heavier the level.
Temperature Wash / Rinse (9)
• To select inlet water temperature for wash and rinse. Selection here may vary
per the cycle chosen. All selections are not available in all cycles.
Off (10)
• If washer is ON push button once to shut off the power.
Start / Pause (11)
• Once washer is powered and selections are chosen, push this button once to
start the wash.
• While unit is working, push this button once to pause it.
• If unit is in pause mode, push this button once to resume operation.
• If "Start/Pause" button is pressed to start the wash, the washer will display the
last cycle set. If any button except "Off" is pressed to start, the washer will no
start in the Normal cycle mode.
• If Start/Pause button isn't pressed within 5 minutes after powering "On" the
unit will automatically switch off and return to stand by mode.
Heavy Duty
Delicates
Quick Wash
Press Free
Custom Cycle
11
HWF5300
Preset Cycle Settings
Cycles Time (in
minutes)
Normal 40
50
Whites 51
Colors 40
31
27
Bulky 45
33
Depends
Wash/Rinse If Soil Level is:
Temperature
Warm/Cold medium
Hot/Cold heavy
Hot/Cold heavy
Cold/Cold medium
Cold/Cold
Warm/Warm
Warm/Cold medium
Warm/Cold
Depends Depends
light
ight
light