Mount The 3M-50 To Wall - Filtrete 3M-50 Install Manual

Mount the 3M-50 to Wall

1. Hold the 3M-50 against the wall, with the wires coming over the top;
above terminal block. The 3M-50 will cover the hole in the wall.
2. Position 3M-50 for best appearance.
3. Attach the 3M-50 to the wall with the screws provided.
4. If you are mounting the 3M-50 to sheet rock or if you are using the
old mounting holes, use the plastic anchors provided.
5. Mark first and drill a 3/16-in.(4.8mm) hole for the insert at each
screw location, then mount the unit.
from
HEAT/COOL
system
Screw to wall
Place wires like this
Wall
3M-50
Wires
Wall
anchor
7
PG