The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus. The mains plug or appliance inlet is used as the disconnect device, remain it readily operable during the apparatus normal use. EN-1 Haier LCD HDTV/DVD...
To assure continued compliance and possible undesirable interference, the provided ferrite cores must be used when connecting this LCD display to video equipment; and maintain at least 40cm spacing to other peripheral device. CANADIAN NOTICE: This Class B digital apparatus compiles with Canadian ICES-003. Haier LCD HDTV/DVD EN-2...
Page 4
SAVE THESE INSTRUCTIONS Thank you for purchasing the Haier product. This easy-to-use manual will guide you in getting the best use of your product. Remember to record the model and serial number. They are on label in back of the unit.
Select the desired sound..........15 Warranty Mute..................15 Video menu ............15 How to select picture mode........... 15 How to customize your own picture status....16 PC Set..................17 Audio menu............17 How to select audio mode..........17 Haier LCD HDTV/DVD EN-4...
Press to open the disc tray, and press again to close the tray. PREV: Insert DVD with label Press to play the previous program. towards back (Silver “shiny” NEXT: side facing towards you.) Press to play the next program. EN-5 Haier LCD HDTV/DVD...
Connect the audio L/R cables to your audio equipment. Connect the audio L/R cables from a computer PC Audio In to this jack. Connect a video cable from a computer to this PC Video In jack. Haier LCD HDTV/DVD EN-6...
Press to display the TV status information on the top of the TV screen W DVD/USB STOP X DVD/USB REPEAT Y DVD/USB Previous Chapter Z DVD/USB Next Chapter [ DVD AUDIO Mode \ DVD SETUP ] DVD PROGRAM ` DVD SUBTITLE EN-7 Haier LCD HDTV/DVD...
If the antenna needs to be split for two TV’s, install a “2-Way Signal Splitter” in the connections. To install the antenna properly please contact a professional in your area. Note All cables shown are not included with the TV. Haier LCD HDTV/DVD EN-8...
VCR. (Refer to the VCR owner’s manual.) in the figure. Select the input source with using the INPUT button on the remote control, and then press button to select the source, press ENTER button to confirm. External A V Source Setup EN-9 Haier LCD HDTV/DVD...
Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.) If the graphic card on the computer does not output analog and digital RGB simultaneously, Use INPUT on the remote control to select Haier LCD HDTV/DVD EN-10...
The synchronization input form for Horizontal and How To Use Vertical frequencies is separate. If the source device supports Auto DVI function, the output resolution of the source device will be EN-11 Haier LCD HDTV/DVD...
If the polarized AC cord does not fit into a non- polarized AC outlet, do not attempt to file or cut the blade. It is the user’s responsibility to have an electrician replace the obsolete outlet. Haier LCD HDTV/DVD EN-12...
/ ENTER button and then use button Press / ENTER button to select Tuner. to select Language. Press button to select language. Press button to select Cable or Antenna ( English, Spanish or French) mode. Press button to select Channel Scan. EN-13 Haier LCD HDTV/DVD...
/ ENTER button and then use button to select Channel Skip. Press button to select a channel, then press 1.Time shift time. The time delay to the current program ENTER button to toggle between and . time. Haier LCD HDTV/DVD EN-14...
Press CH+ button to select a channel number in The picture mode provides the pre-defined images number increasing direction. settings: Standard, Vivid, Custom and Mild . Press CH- button to select a channel number in Press MENU button and then use button to EN-15 Haier LCD HDTV/DVD...
Overscan: This function is active and visible in menu only when the signal is EIA timing (480i /480p /720p Only when the item of mode is custom, the /1080i /1080p) in RGB color space in HDMI/DVI input. Brightness, Contrast, Color, Tint, Sharpness and Haier LCD HDTV/DVD EN-16...
/ ENTER button and then use button Clock Function to adjust the setting. Lock Balance Adjust to emphasize left or right speaker balance. ENTER Adjust Select EXIT Back Bass Adjust to increase or decrease lower-pitched sounds. EN-17 Haier LCD HDTV/DVD...
OSD transparency. SAP appear. If other languages are available on the digital signal, select them with the SAP button. Press button to select Low, Middle or High. Press EXIT button to save and return to TV viewing. Haier LCD HDTV/DVD EN-18...
Press VOL+/- button to select the number of minutes: To select Off, 5Min, 10Min,15Min,30 Min,45Min,60Min,90Min,120Min,180Min or 240Min. Dynamic Contrast Ratio. Press VOL+/- button to select You can also press SLEEP button to select quickly On or Off. EN-19 Haier LCD HDTV/DVD...
Parental Control can be used to block specific channels, ratings and other viewing sources. IMPORTANT:Closed captioning availability entirely depends on broadcasters supplying the The parental control function is used to block program signal. Therefore, closed captioning might not Haier LCD HDTV/DVD EN-20...
ENTER button to enter the next menu. Parental Guidance Once the option is selected, change the settings to Viewers 14 years and older your preference. Adult Programming EN-21 Haier LCD HDTV/DVD...
Page 23
Program Block ENTER Enter Select EXIT Back operas. Press button to select MPAA Rating item. Parental Lock : Press VOL+/- button to select On or Off. Used to lock all the system following. To set Off, Haier LCD HDTV/DVD EN-22...
/ ENTER button and then use screen. button to select the rating. Press DISPLAY button or EXIT button to exit. Press ENTER button to confirm. Function Show the present screen information. Press DISPLAY button or EXIT button to exit. EN-23 Haier LCD HDTV/DVD...
B: Program options E: Program rating categories In ATV mode CCD function allows you to configure C: Program show time the way you choose to view the digital captioning Haier LCD HDTV/DVD EN-24...
Supporting media and file format: Digital pictures Press MENU button, and the press to select (.JPG/.JPEG/.BMP(Baseline & Progressive)/.PNG), Media Type , Press ENTER and press to select digital music (.MP3(8~320kbps)) and Video(.avi/. Photo. mpg/.mpeg/.vro/.vob/.ts coded with MPEG-1 or MPEG-2 standard) files. EN-25 Haier LCD HDTV/DVD...
Audio Only Press the button on the remote control to select the adjusted item, press ENTER button to confirm. Press EXIT button to return to the previous menu. Press USB button to exit the USB mode. Note Haier LCD HDTV/DVD EN-26...
DVD player reads the DVD and displays the opening menu (If there is no disc placed in DVD mode, OPEN will display on the screen all the times) EN-27 Haier LCD HDTV/DVD...
Audio 2/2: AC 3 5.1 CH English All described functions are for dvd discs. Press this button to cycle between Mono Left, Mono If you play other disc Formats the operation and on Right, Mix-Mono and Stereo. screen display will be different. Haier LCD HDTV/DVD EN-28...
This item allows you to set Angle Mark ON or OFF. displayed. On Screen Display (OSD) Language: Press to select, the item, then press Users can select on-screen display language. enter the submenu. CAPTION: Press to select then press ENTER to confirm. EN-29 Haier LCD HDTV/DVD...
Change Default Discs Protection and DVD Characteristics DEFAULT: Resets all settings (except password and parental lock status) for this DVD player back to the manufacturers ON HANDLING DISCS original settings. Press ENTER to perform the reset. Haier LCD HDTV/DVD EN-30...
Page 32
4 kinds at most 2 kinds 2 kinds Sound quality 48KHz, 96KHz/6, 20, 24bit 44.1KHz/16bit 44.1KHz/16bit 44.1KHz/16bit 44.1KHz/16bit ON STORING DISCS Do not stor discs in a place subject to direct sunlight or near heat source. EN-31 Haier LCD HDTV/DVD...
75 ohm Verify if correct channel is selected. No picture Antenna Adjust the antenna. in some Impedance Make adjustments by Fine Tune and channel Manual Scan. 1,070,000,000 (1024 steps of each R, Color G and B) Haier LCD HDTV/DVD EN-32...
This is not a defect covered by repairs performed by anyone other than an authorized the limited warranty. service center or dealer; nor shall Haier be liable, or in any way responsible for incidental or consequential Warranty economic or property damage.
Page 35
Warranty period for this product: one year parts and labor. Additional items excluded from warranty coverage: non- rechargeable batteries. Where to obtain service: For the location of the nearest Haier authorized service center or to obtain product literature, accessories, supplies or customer assistance, please call 1-877-337-3639.
Page 36
Universal Remote Control EN-35 Haier LCD HDTV/DVD...