Table of Contents
Advertisement
External Equipment Connections
External A/V Source Setup
How to connect
Connect the audio and video cables from the external equipment's
output jacks to the TV input jacks, as shown in the figure.
When connecting the TV to external equipment, match the
jack colors (Video = yellow, Audio Left = white, and Audio
Right = red).
How to use
1. Select the input source with using the INPUT button on
the remote control.
2. Press the
/
button to select the desired source.
3. Press the ok button to confirm
4. Operate the corresponding external equipment.
DVD connection
How to connect
1. Connect the DVD video outputs (Y, Pb/Cb, Pr/Cr) to the Y, Pb,
Pr jacks on the TV and connect the DVD audio outputs to the
YPbPr Audio IN jacks on the TV, as shown in the figure.
2. If your DVD only has an S-VIDEO output jack, connect this
to the S-VIDEO input on the TV. as shown in the figure.
NOTE:
If your DVD player does not have component video
output, use S-Video.
How to use
1. Turn on the DVD player, insert a DVD.
2. Use the INPUT button on the remote control to select YPbPr
mode.
3. Press Play button on external equipment for program play.
4. Refer to the DVD player's manual for operating instructions.
Component Input ports
To get better picture quality, connect a DVD player to the component
input ports as shown below.
Component ports
on the TV
Video output ports
on DVD player
Y
Pb
Pr
Y
Pb
Pr
Y
B-Y
R-Y
Y
Cb
Cr
Y
P
P
B
R
Y2
Pb2
Pr2
L
R
Y1
S-VIDEO
Pb1
Pr1
L
R
Y2
Pb2
Pr2
L
R
Y1
Pb1
Pr1
L
R
S-VIDEO
Installation
AV OUT L
R
VIDEO
L
R
Camcorder
Video Game Set
AV OUT L
R
VIDEO
L
R
Owner s Manual 11
Advertisement
Table of Contents
