Gigabyte GA-970A-UD3 User Manual page 46

 OnChip SATA Port as ESP
CMOS Setup Utility-Copyright (C) 1984-2011 Award Software
Port0 as ESP
Port1 as ESP
Port2 as ESP
Port3 as ESP
x Port4 as ESP
x Port5 as ESP
higf: Move Enter: Select
F5: Previous Values
Port0 as ESP/Port1 as ESP/Port2 as ESP/Port3 as ESP
This option is configurable only when OnChip SATA Type is set to AHCI. Enabled will speed up the hot
plug detection of the connected SATA device. (Default: Disabled)
Port4 as ESP/Port5 as ESP
This option is configurable only when OnChip SATA Type is set to AHCI and OnChip SATA Type
Port4/5 is set to as SATA Type. Enabled will speed up the hot plug detection of the connected SATA
device. (Default: Disabled)
F_USB30 Controller (Etron EJ168 USB controller, USB 3.0/2.0 ports routed to the on-
board F_USB30 header)
Enables or disables the Etron EJ168 USB controller. (Default: Enabled)
Onboard LAN Function
Enables or disables the onboard LAN function. (Default: Enabled)
If you wish to install a 3rd party add-in network card instead of using the onboard LAN, set this item to
Disabled.
Onboard LAN Boot ROM
Allows you to decide whether to activate the boot ROM integrated with the onboard LAN chip.
(Default: Disabled)
BIOS Setup
OnChip SATA Port as ESP
[Disabled]
[Disabled]
[Disabled]
[Disabled]
Disabled
Disabled
+/-/PU/PD: Value F10: Save
F6: Fail-Safe Defaults
- 46 -
Item Help
Menu Level 
ESC: Exit F1: General Help
F7: Optimized Defaults