Init Display First; Onboard Parallel Port - Gigabyte P4 Titan GA-8S650GXM-P-C User Manual

Init Display First

AGP Set Init Display First to AGP. (Default v alue)
PCI Set Init Display First to PCI.
Onboard Serial Port A
Auto BIOS w ill automatically setup the port A address.
3F8/IRQ4 Enable onboard Serial port A and address is 3F8. (Default v alue)
2F8/IRQ3 Enable onboard Serial port A and address is 2F8.
3E8/IRQ4 Enable onboard Serial port A and address is 3E8.
2E8/IRQ3 Enable onboard Serial port A and address is 2E8.
Disabled Disable onboard Serial port A.
Onboard Serial Port B
Auto BIOS w ill automatically setup the port B address.
3F8/IRQ4 Enable onboard Serial port B and address is 3F8.
2F8/IRQ3 Enable onboard Serial port B and address is 2F8. (Default v alue)
3E8/IRQ4 Enable onboard Serial port B and address is 3E8.
2E8/IRQ3 Enable onboard Serial port B and address is 2E8.
Disabled Disable onboard Serial port B.
Serial Port B Mode
(This item allows you to determine which Infra Red(IR) function of Onboard I/O chip)
ASKIR Set onboard I/O chip UART to ASKIR Mode.
IrDA Set onboard I/O chip UART to IrDA Mode.
Normal Set onboard I/O chip UART to Normal Mode. (Default Value)

Onboard Parallel port

378/IRQ7 Enable onboard LPT port and address is 378/IRQ7. (Default Value)
278/IRQ5 Enable onboard LPT port and address is 278/IRQ5.
Disabled Disable onboard LPT port.
3BC/IRQ7 Enable onboard LPT port and address is 3BC/IRQ7.
- 41 - BIOS Setup