Initializing The Scanner - Epson PERFECTION 1640SU Office Startup Manual

Initializing the Scanner

Before connecting the scanner to your computer, follow the steps
below to make sure that the scanner is operating properly.
1. Place the scanner on a flat, stable surface.
2. Turn the transportation lock on the right side to the unlocked
position using a coin or similar object, as shown below.
Note:
Return the transportation lock to the locked position when
transporting the scanner.
3. If the power cord is not attached to the scanner, connect it to
the AC inlet on the back of the scanner and plug the other end
into a properly grounded electrical outlet.
c
Caution:
It is not possible to change the scanner's voltage. If the label
on the back of the scanner does not show the correct voltage
for your country, contact your dealer. Do not plug in the
power cord.
4. Open the document cover so you can see the operation of the
scanner during initialization (startup).
Setting up the Scanner
1
1-9