IMPORTANT SAFETY INFORMATION It is most important that this instruction book should be retained with the appliance for future refer- ence. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is left with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant safety information.
CONTENTS Instructions for the User Instructions for the Installer Important Safety Information Technical Specification Description of the Appliance Installation Operation Positioning Before use Rear Spacers Setting the temperature Fresh food refrigeration Electrical Connection Normal operating sounds Door Reversal Positioning the inner shelves Health and Safety Guidelines Maintenance and Cleaning Internal cleaning...
DESCRIPTION OF THE APPLIANCE A - Thermostat control B - Can storage shelf C - Can storage shelves D - Bottle storage shelf E - Salad crisper F - Glass shelf G - Storage shelves...
OPERATION Before using Fresh food refrigeration Remove all securing tapes. Wash inside the To obtain the best performance, do not store warm appliance with lukewarm water and bicarbonate of food or evaporating liquids in the refrigerator; do soda (5 ml to 0.5 litre of water). cover or wrap the food, particularly if it has a strong flavour.
Positioning the inner shelves The walls of the refrigerator have runners so that shelves can be positioned as desired. D040 HEALTH AND SAFETY GUIDELINES Because of consumer demand, preservatives have been removed from many pre-prepared foods. This together with the changes in shopping habits to a once-a-week shop, mean that safe handling and storage of food is even more important than ever.
Unscrew the bulb and replace it with a new 15 watt bulb (available External cleaning from your nearest Electrolux Service Force Centre). Many proprietary kitchen surface cleaners Replace the light cover by sliding it into its original position and replacing the screw.
SOMETHING NOT WORKING If the appliance is not working correctly, please carry out the following checks before calling out an engineer. Symptom Solution No power to the appliance Check there is power at the socket. Check there is not a power cut by checking the household lights.
TECHNICAL SPECIFICATIONS DIMENSIONS Height 139.5 Width 54.5 cm Depth POWER SUPPLY VOLTAGE AND FREQUENCY 220-240 V / 50 Hz TOTAL POWER ABSORBED 90 W AVERAGE DAILY UNITS ELECTRICITY * 0.62 kWh GROSS CAPACITY Fridge 263 l NET CAPACITY Fridge 260 l This figure is based on standard test results in accordance with European Standard EN 153.
INSTALLATION Important Warning IF YOU ARE DISCARDING AN OLD APPLIANCE It must be possible to disconnect the appliance from THAT HAS A LOCK OR CATCH ON THE DOOR, the mains power supply; the plug must therefore be YOU MUST ENSURE THAT IT IS MADE easily accessible after installation.
For replacement, use a 13amp BSI362 fuse. Only Electrical connections ASTA or BSI approved fuses should be used. The plug must not be used if the fuse cover/carrier is Any electrical work required to install this appliance lost. The cover/carrier is indicated by the coloured should be carried out by a qualified electrician or insert at the base of the plug.
Door reversal directions 1. Disconnect from the electricity supply. 2. Remove all loose items, including food, store food in a cool place. 3. Gently lay the appliance on its back with the top held away from the floor by 5-8 cm (2-3 inches) of packing;...