Changing Channels; Changing The Volume - Daewoo DTQ-27U1SC Instruction Manual

Changing Channels

1
2
3

Changing the Volume

1
2
You can change channels in three ways:
1 The WCHV buttons will take you through all memorized
channels, one by one. The WCHV buttons will not access
channels that have not been programmed into the TV's mem-
ory. For more information about programming channels into
memory, see the section "Programming your TV's Channel
Memory" on the previous page.
2
The number buttons (0-9) will take you to any channel, even
if it has not been memorized. To change to a channel, enter its
number; the TV will tune to the new channel when you enter
the second digit of the channel.
3
The PREVIOUS button will take you instantly to the last
channel you were watching.
1 To change the volume of the TV set, use the CVOLB but-
tons on the remote controller or on the front panel.
2 To quickly turn off the sound, press the MUTE button on the
remote. The ' ' will appear on screen. To return the vol-
ume to its previous level, press MUTE again.
Chapter 5 : Operating Your TV 16