Vcr Playback - Orion DVD/VCR-855 Instruction Manual

VCR Playback

1
2
3
4
5
Various Playback Methods
If you want fast forward (or reverse) playback, press [√ √ √ √ ] or [œ œ œ œ ] button in
Playback mode. You can watch fast playing (rewinding) screen.
* NOTE: You might see no color noise band when you fast forward (or reverse)
If you want Still picture, press [PLAY/PAUSE] in Playback mode. You can watch
the desired screen in pause status.
If you want slow-motion playback, press [√ √ √ √ ] button in Pause mode. You can
watch the desired screen in the slow forward playback.
* NOTE: VCR doesn't have Slow Reverse Playback function.
If you want to watch a series of screens one by one, (FRAME ADVANCE) press
[NEXT √ √ √ √ ] button in Pause mode. Each time you press this button, the picture
advances one frame.
If the product, which
If you press [REPLAY] button in playback mode, the player quickly rewinds 15
has a auto-detector,
seconds of the tape and plays it.
detects a contaminated
head(s), it shows the
If you press [CM SKIP] button in playback mode, the player quickly skips 30
conditions to notice the
seconds of the tape and plays it.
contamination on
screen.
To Adjust Display
* In case of the notice
This product includes automatic Tracking function and enables users to enjoy clear
on screen, please rub
the heads with a head-
picture without an additional operation. Provided that the following problems can be
cleaner followed by
solved by the manual adjustment, which improves display quality. (During automatic
"How to use a head-
display adjustment, "Adjusting Display" are displayed on TV screen.)
cleaner".
- If the screen is poor in Playback mode,
- If noises occur in the upper or lower part of screen in slow playback mode,
- If paused picture vibrates up and down.
Use [TRACKING +/-] buttons of remote control to adjust the display suitable for watching.
22
Press [ ] button to power on.
Press [VCR] button of remote control to change into VCR mode.
Insert the desired tape.
If you want to playback it, press [PLAY/PAUSE] button.
When the operational status is flickering or poor, adjust it with [TRACKING
+/-] button.
To stop it, press [ ] button.
For pause, press [PLAY/PAUSE] button in playback mode.
If you press this button once more, it starts playback again.
Press [EJECT] button in the front part or [OPEN/CLOSE] button on remote
control to remove the tape.
playback the tape which is recorded in LP mode.