Appendix; Before You Ask A Specialist - Teac MV-4092G Owner's Manual

4head video cassette recorder with g-code
Table of Contents

Advertisement

DVSK471DX-HB/H_(GB) 00.11.17 4:1 PM ˘ ` 21

Before you ask a specialist

Mains supply
the video's display does not light
the video doesn't work
Recording
doesn't start
the cassette starts playback
or is ejected
Playback
no picture
poor picture quality
poor still picture
Remote control doesn't work
General
a cassette won't load
the cassette won't rewind, fast forward,
play or record mode
timer is recording incorrectly
a loud noise when left in Stop mode
"ERR" occurs in the display
A P P E N D I X
- The mains lead is not connected to the wall socket.
- condensation may have formed when moving the video
recorder from a cold to a warm room. Wait until the video (and
cassette!) reach room temperature.
- Is a cassette loaded?
- the safety tab may be missing. Cover the hole with adhesive
tape (page 13).
- Are the TV stations tuned in on the video
(page 5)?
- Is there a recording on the video tape?
- Use PR. –/+ buttons to adjust tracking if horizontal stripes appear.
- Is the cassette of poor quality or worn out? Test with another cassette.
- If you are not using a RCA cable, have you tuned the location
for video input on the TV properly? pages 5/17.
- Try a different cassette. The video head drum may need
cleaning - ask your dealer.
- Press
(pause) several times. Adjust with the PR +/- buttons
until you get the best picture.
- are the batteries run down?
- is the distance between remote control and video more than
7 meters?
- is there an object blocking the direct line between remote
control and video?
- is there a cassette already loaded? If so, the video's display
will indicate it.
- the cassette is already fully wound back or to the end.
- is the clock set correctly (page 11)?
- if no play or record function is used for about five minutes
when left in Stop mode, the video switches its motor off to
conserve the mechanism.
- Your video has detected abnormal conditions. Release this
mode with any button , your video then safely switches to
stand-by.
21

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents