Page 1
PLASMA TELEVISION USER MANUAL D T S - 4 2 H D T D T S - 5 0 H D T Proper use guarantees product life. Before using the product, be advised that you read this user manual well and try to operate it.
Page 2
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol is lntended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with a damp cloth. 7. Do not block any of the ventilation openings. Install in accordance with the manufacturer's instructions.
Page 4
CCF Technology makes the picture clearer by controlling of the brightness among three different color filters. • MGDI (Meta Genuine Digital Image) Engine MGDI is the image enhancement technology of Daewoo Electronics, which provides more clear, splendid, and delicated images. • BBE(Bass Boost Effect) Sound Effect Manufactured under license from dolby labora tories.
Page 5
F C C R F I N T E R F E R E N C E S T T E M E N T F C C R F I N T E R F E R E N C E S T T E M E N T NOTE : This equipment has been tested and found to comply with the limits for a...
Safety Precautions Power Always obey all During a lightning storm, or when it is left When unplugging your TV, always grip unattended and unused for a long period plug firmly and pull straight out from the safety messages. of time, unplug it from the wall outlet. receptacle.
Page 7
During Use Do not open the cover (or back) Never push any kind of objects into because high voltage is present this product through openings at the within the TV enclosure. back of TV. It may cause electric shock. It may cause fire or electric shock. The apparatus shall not be exposed to Do not allow children to play or hang Do not place a candle or lighted...
Page 8
Safety Precautions Power Always obey all When moving your TV, remove the power Do not touch the power plug with wet plug, antenna, and cables, and be sure to hands when plugging or unplugging it safety messages. move it by using two people.. into the wall socket.
Page 9
During Use Do not wipe the TV using a cloth Do not place heavy objects or heat damped with chemicals (benzene, sources on the power cord. thinner, etc.). TV appearance may be marred. It may damage the power cord, causing fire (Unplug the power plug and wipe with soft or electric shock.
Checking Accessories Note Check to be sure that the following items are packed with your Plasma panel. Supplied Accessories Remote Control 1 UNIT Ferrite Core 2UNITS Place the small ferrite cores in the speaker cables close to the speaker terminals of Component Cable (Option) 1UNIT the PDP unit.
Note The following items are optional accessories. Refer purchasing optional accessories from Optional Accessories Daewoo Electronics Local retailer or the retailer from where you purchased the unit. Speakers Table Top Stand Wall Mounting Unit 11 11...
Antenna Connection Outdoor Antenna Connection when watching both analog and digital broadcasts through outdoor antenna connection Connect a antenna coaxial cable to the input terminal INPUT - ANTENA1 - OUTPUT ANTENA 2 INPUT ANALOG/DIGITAL DIGITAL ONLY Select Input Start Ant. setup Video Analog ant.
Page 15
Shared Antenna Connection when watching both analog and digital broadcasts through antenna connection in your apartment. Please contact your apartment office for terrestrial digital broadcast. Connect the TV's antenna 1 to the antenna socket as shown figure INPUT - ANTENA1 - OUTPUT ANTENA 2 INPUT ANALOG/DIGITAL DIGITAL ONLY...
Page 16
Watching Cable Broadcasts with cable broadcast receiver When receiving digital broadcasts from a cable broadcast. Please contact your local cable TV company for terrestrial digital broadcast. Connect signal divider and coaxial cables as shown figure INPUT - ANTENA1 - OUTPUT ANTENA 2 INPUT ANALOG/DIGITAL DIGITAL ONLY...
Page 17
Watching Cable Broadcasts without cable broadcast receiver When receiving digital broadcasts from a cable broadcast. Please contact your local cable TV company for terrestrial digital broadcast. Connect the TV's antenna 1 to the antenna socket as shown figure. INPUT - ANTENA1 - OUTPUT ANTENA 2 INPUT ANALOG/DIGITAL DIGITAL ONLY...
Page 18
Watching Digital Broadcasts Through Digital Antenna Use digital(only) antenna when your local cable broadcast company does not transmit digital broadcasts or unable to receive digital broadcasts over the existing antenna. Use UHF antenna for digital(only) antenna. Install the antenna where there aren't any obstacles. It may be difficult to receive for areas with many signal obstacles.
Page 19
Connecting Antenna Output Terminal(Recoding etc.) Use this feature when record TV broadcast to external recording devices. Connect signal divider and coaxial cables as shown figure. INPUT - ANTENA1 - OUTPUT ANTENA 2 INPUT ANALOG/DIGITAL DIGITAL ONLY Turn on the TV and the device. From the menu select channel.
Watching Cable Broadcasts Connect a Cable Broadcasting Receiver to the PDP. Watching Cable • Prepare the A/V cable. Broadcasts • Connect the receiver(Output) to PDP(Video Input) as shown below. • When connecting to an external AV source, be sure to match the colors. •...
Page 21
Input Select • Select [Video 1 or Video 2] by pressing TV/VIDEO the TV/VIDEO button of the Remote Control or the "INPUT SELECT" Key in KeyPad of the pdp set. • Each time you press the “TV/VIDEO” button, different input modes appear. The sequence is as follows: Video1 Video2...
Watching Digital Broadcasts Connect a Digital Broadcasting Receiver to the Watching Digital • Prepare supplied A/V cables. Broadcasts • Connect the cables from the Digital TV Receiver output terminal to the PDP(Component 1, 2) input terminal. • To watch digital •...
Page 23
Input Select • Select [Component 1 or Component 2] by pressing the “Multimedia” button of the Remote Control or the "INPUT SELECT" Key in KeyPad of the pdp set. • Each time you press the “Multimedia” button, different input modes appear. The sequence is as follows: Component1 Component2...
Watching Cable Broadcasts Connect a Cable Broadcasting Receiver to the PDP. Watching Cable • Prepare the A/V cable. Broadcasts • Connect the receiver(Output) to PDP(Video Input) as shown below. • When connecting to an external AV source, be sure to match the colors. •...
Page 25
Input Select • Select [Video 1 or Video 2] by pressing TV/VIDEO the TV/VIDEO button of the Remote Control or the "INPUT SELECT" Key in KeyPad of the pdp set. • Each time you press the “TV/VIDEO” button, different input modes appear. The sequence is as follows: Video1 Video2...
Watching Satellite Broadcasts Connect a Satellite Broadcasting Receiver to the PDP. Watching Satellite • Prepare the A/V cable. Broadcasts • Connect the receiver(Output) to PDP(Video Input) as shown below. • When connecting to an external AV source, be sure to match the colors. •...
Page 27
Input Select • Select [Video 1 or Video 2] by pressing TV/VIDEO the TV/VIDEO button of the Remote Control or the "INPUT SELECT" Key in KeyPad of the pdp set. • Each time you press “TV/VIDEO” button, a different input mode appears. The sequence is as follows: Video1 Video2...
Watching a DVD Image Connect a DVD Player to the PDP. Watching a DVD • Prepare the AV cable. Image • Connect the DVD(Output) to the PDP(Component or Video Input) as shown below. • When connecting to an external AV source, be sure to match the colors. •...
Page 29
Input Select • Select [Component 1 or Component 2, Video1, Video2] by pressing the “MULTIMEDIA” or “TV/VIDEO” button of the Remote Control or the "INPUT SELECT" Key in KeyPad of the PDP set. • Each time you press the “MULTIMEDIA” or “TV/VIDEO”...
Watching a VCR Image Connect a VCR to the PDP. Watching a • Prepare the AV cable. VCR Image • Connect the Video(Output) to PDP(Video Input) as shown below. • Video can use either the video terminal or the S-video terminal. POWER VIDEO/ CATV...
Page 31
Input Select • Select [Video 1 or Video 2] by pressing TV/VIDEO the “TV/VIDEO” button of Remote Control or the "INPUT SELECT" Key in KeyPad of the pdp set. • Each time you press the “TV/VIDEO” button, a different input mode appears. The sequence is as follows: Video1 Video2...
Watching a Camcorder/Game Console Image Connect a Camcorder/Game Console to the PDP. Watching a Camcorder/Game • Prepare the AV cable. Console Image • Connect the Video(Output) to the PDP(Video Input) as shown below. • When connecting to an external AV source, be sure to match the colors. •...
Page 33
Input Select • Select [Video 1 or Video 2] by pressing TV/VIDEO the “TV/VIDEO” button of the Remote Control or the "INPUT SELECT" Key in KeyPad of the pdp set. • Each time you press the “TV/VIDEO” button, a different input mode appears. The sequence is as follows: Video1 Video2...
Connecting PC(15pin D-sub) Before connecting to the PDP, set the resolution of the PC. Connecting PC • Go to SETUP-CONTROL PANEL-DISPLAY PROPERTIES in Window Screen of the PC. • Choose the SETTINGS tab in the DISPLAY Menu. • This product •...
Page 35
Press the Power Buttons. • Turn on the PDP and the PC. POWER POWER Input Select • Select [PC] by pressing the “MULTIMEDIA” button of the Remote Control or PDP unit. • Each time you press the “MULTIMEDIA” button, a different input mode appears. The sequence is as follows: Component1 Component2...
Connecting PC(DVI) Before connecting to the PDP, set the resolution of the PC. Connecting PC • Go to SETUP-CONTROL PANEL-DISPLAY PROPERTIES in Window Screen of the PC. • Choose the SETTINGS tab in the DISPLAY Menu. • This product • In the SETTINGS Menu, select 640 x 480 or 800 x 600, 1024 x 768 @ 60Hz supports resolution of VGA, SVGA, XGA, SXGA.
Page 37
Press the Power Buttons. • Turn on the PDP and the PC. POWER POWER Input Select • Select [DVI] by pressing the “MULTIMEDIA” button of the Remote Control or PDP unit. • Each time you press the “MULTIMEDIA” button, a different input mode appears. The sequence is as follows: Component1 Component2...
Page 38
PC and DVI Input Resolution Available in PDP • Depending on graphic card, problems like no signal detected or line noises can happen. If these problems happen, contact the graphic card company for help. Resolution H Freq. (KHz) V Freq. (Hz) Remark 640x480 31.469...
Page 39
Connecting Dolby digital Amp. Connecting coaxial digital audio output to dolby digital Amp. enables you yo hear enhanced sound.(Dolby digital sound is output only when it is receiving digital broadcasts) When both Optical/Coaxial are connected Coaxial has priority. OPTICAL COAXIAL DIGITAL SOUND OUTPUT OPTICAL COAXIAL...
Panel Controls Front Panel, Back Panel, Remote Control Items having same names on Plasma television and the remote control would function in exactly the same way. Front ON/OFF STAND BY/OPERATE • Power control sensor • Select when adjusting volume or Power Standby: Red - Standby select/adjust “MENU.”...
Remote Control Note Use two AAA batteries. Be sure to use replacement batteries The number in ( ) indicates the page in the of the same type as the original ones. function of each button is explained in detail. The life of a battery depends on how much it has been used.
MUTE PROG.GUIDE F.R/SLOW PLAY F.F/SLOW Video Function STOP PAUSE (F.R/PLAY/F.F/REC/STOP/PAUSE) PREV OPEN/CLOSE NEXT DVD Function (PREV, OPEN/CLOSE, NEXT) PICTURE SOUND MODE MODE SLEEP Picture Mode Sleep Sound Mode Position Swap PIP POSITION SWAP Sub Ch VIDEO TV/Video ADD/ MTS CAPTION ERASE Add/Erase Caption...
IR receiver of the device. If the code is set properly, use the device after power on. Contact to Daewoo Electronics Service Center to get the Remote Control Setup Code. DISPLAY...
Watching TV The buttons on the PDP set, which have a same name with that of remote control, function same role. As the main AC is off POWER state, the remote VIDEO/ control is not working CATV because there is no power supplied to the PDP set.
Page 45
MENU Volume Volume decrease increase The LED light is changed to red color. POWER VIDEO/ CATV 'Mute' is useful when you have a phone call MENU or visitor OSD shows 'Mute' when it works properly. MUTE PROG.GUIDE While mute state, press the button again F.R/SLOW PLAY F.F/SLOW...
Main Features It shows the current DISPLAY Digital 2 / 22 / 05 channel information Air 35-1 WHD-TV ENGLISH AM 08 : 28 STILL TV/VIDEO and change the channel analog to digital or vice versa. PIP POSITION SWAP Analog VIDEO Choose the disire channel.
Basic Function MENU Pressing main key shows the OSD below. Mode User Brightness Video Contrast Color Audio Tint Sharpness Channel Color temp. Normal Feature Time MENU Exit Move Select Select the dsire menu using Vel. key and Ch. key. MENU...
Select the Input Signal Select proper anttena depend on where the cable is connected. Refer to 'antena and cable connection'( Antenna 1 Select the channel in the menu. MENU Receive both analog and digita broadcast. Ant. setup Start Video Analog ant. Digital ant.
Page 49
Select 'Antenna 2'. Receive only digital MENU Ant. setup Start broadcast. Video Press the Analog ant. Digital ant. "MENU" button Audio Ant. 2 Active Ch. setup Start Fine tune Channel Sig. strength No signal Feature Time MENU MENU Prev. Move Select Select the "Channel"...
Select the channel in the menu. Auto Channel search MENU Start Ant. setup Video Analog ant. The function for finding Press the Digital ant. Audio Ant. 2 Active only the channels that "MENU" button Ch. setup Start Fine tune have broadcast signals. Channel Sig.
Page 51
Store the desire channel. This function is used when a desired channel is not DISPLAY searched with Auto Channel STILL TV/VIDEO Search because of its weak signal. Also, it is used when PIP POSITION SWAP you want to delete the undesire channel stored by VIDEO auto channel search.
Fine Tune Select the MENU -> Ch. Fine Tune MENU Ant. setup Start Video Analog ant. If you are unable to get Digital ant. Audio a good picture or Ant. 2 Active Ch. setup Start sound becasue of a Fine tune Channel Sig.
Digital Signal Strength Select MENU -> Ch. Digital Signal Strength MENU Start Ant. setup Video Analog ant. This function shows Digital ant. Audio the digital signal Ant. 2 Active Ch. setup Start strength, so you can Fine tune Channel No signal Sig.
Selecting Picture Mode Selecting Picture Mode Selecting Picture • Press the [PICTURE MODE] on the Mode PICTURE Remote Control. MODE • While pressing the [PICTURE MODE] for • Select the Picture mode the first time, the current PICTURE MODE that is appropriately set will be displayed.
Customizing Picture Press the MENU Button. Customizing • The MENU shown below will display on the screen. Picture • You can adjust the Mode Normal MENU color tone and Brightness Video brightness to your Contrast Color Audio preference. Tint Sharpness Channel Color temp.
Page 57
Select User Mode Adjustments • While you are in [Picture Mode – User], press the “ ” buttons to select a specific adjustment item. MENU Mode User Brightness Video Contrast Color Audio Tint Sharpness Channel Color temp. Normal Feature Time Prev.
Adjusting Screen Size Press the “SCREEN SIZE” Button. Adjusting Screen Size • Each time you press the “SCREEN SIZE” button on the Remote Control, a different “SCREEN SIZE” appears. The sequence • You can adjust used is as follows: screen size or •...
Adjusting Screen Size(PC, DVI) Press the “SCREEN SIZE” Button. Adjusting Screen • Each time you press the “SCREEN SIZE” button on the Position and Size Remote Control, a different “SCREEN SIZE” appears. The sequence used is as follows: • You can adjust the screen position and size as desired.
Page 60
Press the Volume “ VOL ” button. • Press the Volume “ VOL ” button to enter the sub menu of [Screen]. • While you are in [Screen] mode, press the “ CH ” button to select a desired item, and then, adjust the MENU value by pressing the “...
Adjusting Auto Sound Mode Select "SOUND MODE". Adjusting Auto • Press the "SOUND MODE" on the Sound Mode SOUND Remote Control. MODE • Current sound mode will be • Enjoy various sound displayed. modes by selecting your favorite Sound Mode depending on the kinds of moving pictures.
Customizing Sound Mode Press the MENU Button. Customizing • The MENU Screen as below will be displayed. Sound Mode Mode Normal • This feature allows Brightness Video MENU the user to adjust at Contrast Color Audio his preference. Tint Sharpness Channel Color temp.
Page 63
Select the Effect Mode. MTS Function • Select [Effect] by pressing the “ CH ” buttons, then • Select [Effect] by pressing the “ CH ” buttons, then select ON/OFF by pressing the “ VOL ” button. select ON/OFF by pressing the “ VOL ” button. •...
Selecting INPUT SIGNAL INPUT SIGNAL • Used to select INPUT signal of external device connected to the PDP. Press the INPUT SELECT Button. • Press the “TV/VIDEO” and “MULTIMEDIA” button on the TV/VIDEO Remote Control or the PDP Display to select desired input signal.
Page 65
” • “TV/VIDEO button Video1 Video2 ” • “MULTIMEDIA button Component1 Component2 Component 1 1920 x 1080 NOTES: 1) If an external device is not connected or INPUT signal is not applied, Warning Message (“No Signal”) would be displayed. 2) In this case, check if external device is connected and/or terminal connection is properly done.
Indicates the mode and frequency of the current INPUT signal. ADD/ MTS CAPTION ERASE NOTES: 1) DAEWOO PLASMA can receive NTSC, PAL, SECAM, etc. 2) “1920 x 1080” displayed in the INPUT signal is not the resolution of the TV. The displayed resolution is sent by Digital Broadcastion Receiver.
MENU Opacity, Language and Key pad Lock Settings Menu Background Press the MENU Button. and Language • The MENU screen will be displayed as below. Settings Mode Normal • Used to select Brightness Video transparent of MENU Contrast Color Audio MENU background Tint and language used...
Page 68
MENU Opacity, Language Settings Select LANGUAGE by using the “ CH ” Button. • Select LANGUAGE by using the “ CH ” button. • Every press of the button while you are in the “ VOL ” [LANGUAGE] mode would cycle through the different languages.
MGDI (Meta Genuine Digital Image) MGDI is the image enhancement technology of Daewoo Electronics, which provides more clear, splendid, and delicated images. Press the MENU Button. MGDI • The MENU screen will be displayed as below. Demo Mode Normal • When [MGDI] is set to...
Closed Caption Setting Closed Caption Setting • Press the “CAPTION” button on the Remote Control. • Whenever pressing the “CAPTION” button, caption mode is changed as follow. CAPTION POWER VIDEO/ CATV DISPLAY STILL TV/VIDEO O ff MENU Closed Caption Setting in the Menu. MUTE PROG.GUIDE •...
Page 71
Closed Caption Setting Select Features Caption Box Setting • Select [Features] by pressing the “ ” button. • Black : Background of Caption Caption style Video the caption box is MENU PIP / POP black. Audio MGDI • Transparent : Menu opacity Rich Channel...
Time Setting Press the MENU Button. • The MENU screen will be displayed as below. Normal Mode Brightness Video MENU Contrast Color Audio Tint Sharpness Channel Color temp. Normal POWER Feature Time VIDEO/ MENU Exit Move Select CATV Select Time •...
Page 73
Time Setting Clock(current Off Time and Wake Time settings. time) Setting • Select Functions by pressing the “ ” button. First, set [Current Time]- current time, and then You • The “Current time” can setup off-time and wake time. must be set up ahead •...
Image Sticking Minimization(ISM) Press the MENU Button. • The MENU screen will be displayed as below. • Image sticking Mode Normal Brightness Video minimization. Contrast MENU • Displaying a still Color Audio Tint image like PC input Sharpness Channel for a long time Normal Color temp.
Parental Lock Setting Press the MENU Button. • The MENU screen will be displayed as below. Parental Lock Mode Normal Brightness Video • When “Parental MENU Contrast Lock” is on, the Color Audio Tint locked channels are Sharpness Channel not available on the Color temp.
Page 76
Parental Lock Setting New Password Press “Password”. setting • Press Password by New Password setting using number 0~9. menu is displayed at Caution) If using your first use. password, Confirm password Set New Password for remember it. It is needed using Parental Lock Eenter the password for continuous...
Page 78
Parental Lock Setting “Change Password”. • In the initial purchase of TV set, password is set to blank. In continuous use of Parental Control, you need to change your password. • If pressing the “ VOL ” button after MENU selecting password, the second screen of below drawing appears.
Setting Sleep Timer Press the “SLEEP” Button. Setting Sleep Timer • Press the “SLEEP” button on the Remote Control. • Pressing the “SLEEP” button first time will display the SLEEP current setting for SLEEP TIMER. • SLEEP TIMER turns • To cancel the SLEEP TIMER, press the “SLEEP” button the PDP off after a to select ‘OFF’.
Before Requesting for Service Before requesting for service, check the following points once again. • Remote control does not • The Display makes a snapping • There are empty spots at the top function properly. sound. and the bottom area of the screen. •...
Immediately wash it with clean water, and dry it in a shadow place, then call for service from the nearest Daewoo Service Center. Never plug the Power Cord since there is risk of electric shock and SPECIFICATIONS damage of the product.