Checking The Battery Level - Canon EOS Rebel T2 SERIES' EOS 300X SERIES Instruction Manual

Checking the Battery Level

Check the battery level after replacing the batteries and before
using the camera.
Battery Life
Temperature
At 20˚C
At –10˚C
• The battery life shown above is based on Canon's testing
conditions with new batteries.
• If nothing is displayed on the LCD panel, the batteries may have
been installed incorrectly. Take out the batteries and install
correctly.
• If you often press the shutter button halfway for a prolonged
period or just autofocus without taking a picture, the battery life
will be affected.
• When not using the camera, set the Mode Dial to
12
Turn the Mode Dial to a shooting
mode.
•
The camera will then turn on and the
LCD panel will display one of the
following battery level mark:
0% Flash Use
54 rolls
35 rolls
: Battery level OK.
: The battery level is low. Keep
spare batteries handy.
: The batteries will soon be
completely exhausted.
: Replace the batteries.
50% Flash Use 100% Flash Use
23 rolls
16 rolls
(With 24-ex. rolls)
16 rolls
11 rolls
<:>.