Table of Contents
Advertisement
Setting Silent Control Operation
The STOP TIME
and CLEAN
feature allows the oven control to be operated without sounds or beeps whenever necessary. If desired the control can be
programmed for silent operation and later returned to operating with all the normal sounds and beeps.
INSTRUCTIONS
To change control from normal sound operation to
silent control operation:
1. To tell if your range is set for normal or silent operation press
and hold
for 7 seconds. "DELAY" will appear and flash in
the display (Fig. 1). If ":SP" appears (Fig. 2), the control will
operate with normal sounds and beeps. If ":- -" appears (Fig.3),
the control is in the silent operation mode.
2. Press
to switch between normal sound operation and silent
operation mode. The display will show either ":SP" (Fig. 2) or ":-
-" (Fig. 3).
3. Press
to accept the change or press
change.
Setting Oven Controls
pads control the Silent Control operation feature. The Silent Control operation
to reject the
19
PRESS
DISPLAY
for 7seconds
or
Figure 1
Figure 2
Figure 3
Advertisement
Table of Contents
