Magnetic Door Seal - AEG ARCTIS U 86050 i Operating And Installation Instructions

Built-in freezer
Table of Contents

Advertisement

Magnetic door seal

3. Switch off the appliance and unplug it.
4. Clean the appliance and the interior accessories with a cloth and luke-
warm water.
5. After cleaning wipe with fresh water and rub dry.
6. After everything is dry, switch to fast freeze. After running the appli-
ance for two or three hours, it is ready again for storing frozen food.
An accumulation of dust will affect the performance of the appliance
and cause excessive electricity consumption. The structure of the
appliance permits you to clean the rear zone close to the wall, using a
vacuum cleaner.
1. Remove the plinth (1), then the venti-
lation grid (2);
2. Carefully pull the air deflector out (3).
Magnetic door seal
After opening and closing the door of your freezer you will not be
able to open the door again immediately. This is because a vacuum will
have developed inside, keeping the door closed until the pressures
inside and outside the door have equalised. After a few minutes you
can easily reopen the door.
26
3
2
1

Advertisement

Table of Contents
loading

This manual is also suitable for:

Arctis u 86050-4 i

Table of Contents