Software Configuration - NEC Storage Manager User Manual

1 . 2 . 2 S o f
1 . 2 . 2 S o f
1 . 2 . 2 S o f
Select software to be used according to the hardware components, operating conditions, etc. Figure
1-2 shows a software configuration example.
Business Server
(Operated
primarily)
ReplicationControl
PathManager
Switch
Dir No.1
Port No.0
AccessControl
PerformanceMonitor
DynamicDataReplication
•
Because business servers are in cluster configuration, let both the administration and standby
business servers belong to the same domain. In both the primary and standby business servers,
install the same business application software.
•
Install the backup software in the backup server.
•
Install the management software in the management server. Install the iSM in the management
server.
•
Install the ReplicationControl in the master and backup servers.
•
Install the DynamicDataReplication and the RemoteDataReplication in the disk array. From the
server where the iSM is installed, the iSM replication management functions can be executed for
disk arrays where the DynamicDataReplication or the RemoteDataReplication has been installed.
t w a r e C o n f i
t w a r e C o n f i
t w a r e C o n f i
Switch
Dir No.0
Port No.0
Figure 1-2 Software Configuration Example
3
Chapter 1 Installation Procedure
g u r a t i o n
g u r a t i o n
g u r a t i o n
Storage Manager
Business Server
(Standby)
ReplicationControl
Dir No.1
Port No.1
PathManager
Dir No.0
Port No.1
LAN
Backup Server
LTO