NEC Storage Manager User Manual page 13

(v) [Edit] button
To modify a disk array, select a disk array you want to edit and click the [Edit] button, or double-click the disk
array and edit it on the Edit screen (Figures 1-4 and 1-5).
(vi)
(vii)
(vi) [Specification by IP Address]
To monitor a disk array in TCP/IP connection, select [Specification by IP Address] to display the IP address
addition screen (Figure 1-4).
(vii) [Specification by Disk Number]
To monitor a disk array in FC connection, select [Specification by Disk Number] to display the disk addition
screen (Figure 1-5). Disk number is a number assigned by Windows to manage logical disks. The setting is
generally not required since the disk arrays connected by FC are automatically detected by checking [Automatic
detection of Disk Array Subsystems connected by FC].
(ix)
(viii) [Main IP Address]
In [Main IP Address], specify an IP address or host name. Up to 63 characters can be used for a host name.
Non-ASCII code characters, control characters, double quotation mark, and space cannot be used for a host
name.
iSM connects to the IP address or that specified for the host name (port number: 2730) to conduct monitoring.
Figure 1-3 Disk Array Subsystem - Add Screen - 1
(viii)
Figure 1-4 Disk Array Subsystem - Add Screen - 2
I-7
Chapter 1 Server Installation