There are two ways to enter the 3D menu to adjust the 3D settings:
1)
By pressing the
"VIERA Tools"
Press remote "VIERA Tools" button, then select "3D"
2) By pressing the
"Menu"
Press remote "MENU" button, then select "Setup" > "3D settings"
Note: Both are actually same menu as next page. However, from VIERA Tools, the message below will be
displayed except when TV(ANT In = Antenna) or HDMI input is selected instead of 3D settings.
Enjoy an entirely new viewing experience with Panasonic 3D.
Display 3D content via an HDMI-connected device or 3D DTV signals
via the Antenna input.
3D Settings Menu
OSD images (Menu)
on the remote control
button on the remote control
3D
Slide 31