Advertisement
INSTALLATION INSTRUCTIONS (HEAD EXPANDER)
Note: To determine if the Head Expander is required refer to Step 4B.
A. Make a pencil mark
window on the room side edge of each jamb.
B. Install the head expander on the top of the
window frame.
the head as far as it will go.
C. Test fit the window into the opening.
the pencil marks are not visible. If the
Note: If the expander extends past
the pencil mark it may be necessary
to shim the original sill or to order a
larger window.
D. Drill two 1/16" pilot holes
E. Proceed to Step 4D.
CLEANING INSTRUCTIONS
to remove all liquid by wiping dry or use a clean squeegee. The vinyl frame may be cleaned as described
debris. Keep weep holes open and clear of obstructions.
®
®
or Soft scrub
may be used. Do
Advertisement
