Software Upgrade - Samsung DA FM60C User Manual

f You may be required to enter a PIN code (password)
when connecting the Bluetooth device to the Wireless
Audio Portable. If the PIN code input window appears,
enter <0000>.
f The Wireless Audio Portable supports SBC data
(44.1kHz, 48kHz).
f The AVRCP feature is not supported.
f Connect only to a Bluetooth device that supports the
A2DP (AV) function.
f You cannot connect to a Bluetooth device that supports
only the HF (Hands Free) function.
f Only one Bluetooth device can be paired at a time.
connecting an audio deVice using auX in
This section explains how to connect the unit to an audio device.
This unit requires one audio analog jack for connecting to an
audio device.
VOL
MUT E
FUN
C.
BAS
S
Earphones
jack
External device
VOL
MUTE FUNC.
Press the button to select AUX function. BASS
f Before moving or installing this product, be sure to turn off
the power and disconnect the power cord.
4
English
using the soundshare Function
This section explains how to connect the Wireless Audio
Portable to Bluetooth compatible SAMSUNG TVs.
1. Turn on the Samsung TV and Wireless Audio Portable.
• Set 'Add New Device' to 'On' in the TV's 'SoundShare
Settings' menu. (Refer to the TV's user manual for details.)
VOL
MUTE
2. Press the
Audio Portable to
with Bluetooth pairing appears.
SERVICE
• The
5V 500mA
3. Select <Yes> on the TV screen. The Wireless Audio Portable
AUX IN pairs with the TV.
• The
DC 14V 2.5A
• The Wireless Audio Portable Bluetooth pairing is complete.
• If you want to cancel an existing pairing and pair the
Audio Cable
Wireless Audio Portable to another TV, press the
(not supplied)
button for 3 seconds with the unit in
f SoundShare is supported by some Samsung TVs
released after 2012. Check whether your TV supports
SoundShare before you begin.
f Optimal pairing distance is 3.3 feet or less.
Connect
E
MUT
FUN C.
BAS S
FUNC.
BASS
button to change the mode of the Wireless
. A message asking whether to proceed
blinks in the standby mode.
indicator blinks, and then stops blinking.
VOL
MUTE
mode.

soFtWare uPgrade

Samsung may offer upgrades for
the Wireless Audio Portable's
system fi rmware in the future.
If an upgrade is offered, you can
upgrade the fi rmware by connecting
a USB drive with the fi rmware
upgrade stored on it to the Service
(USB) port on your Wireless Audio
Portable.
Please visit Samsung.com to receive more information about
downloading upgrades fi les.
To upgrade after you have downloaded the fi rmware, follow
these steps:
1. Turn on the product.
2. Insert a USB drive containing the fi rmware upgrade into the
Service (USB) port on the back of the product.
VOL
VOL
MUTE FUNC.
3. Press the and BASS buttons for 5 seconds at the same time.
MUTE FUNC.
BASS
The update process starts.
• All LEDs indicators will blink during the update process.
4. The LEDs will turn off automatically after the update process
is complete.
• Do not disconnect the power or remove the USB drive
while upgrades are being applied.
• The product will turn off automatically after completing the
fi rmware upgrade.
• When fi rmware is upgraded, settings you have made will
FUNC.
BASS
return to their default (factory) settings. We recommend
you write down your settings so that you can easily reset
them after the upgrade.
• When the battery indicator LED is red, do not update the
product. Doing so could cause the product to malfunction.
f If the fi rmware fails to upgrade, we recommend formatting
the USB drive in FAT16 and trying again.
f For upgrading purposes, do not format the USB drive in
NTFS format because it is not a supported fi le system.
f Depending on the manufacturer, the USB may not be
supported.
SERVICE
5V 500mA
AUX IN
DC 14V 4A
SERVICE
5V 500mA
AUX IN
DC 14V 4A