Bd Wise; Auto Power; Standby Control; Lamp Schedule - Samsung ME32B User Manual

8
System

8.13.3 BD Wise

Provides the optimal picture quality for Samsung DVD, Blu-ray and Home Theater products which
support BD Wise. When
optimal resolution.
Available when you connect Samsung products that support
product.

8.13.4 Auto Power

Enabling this option will automatically power on the product if the power cable is connected.

8.13.5 Standby Control

You can set the screen standby mode to be applied when an input signal is received.
Auto
Power-saving mode will activate if no input signals are detected even though a source device is
connected to the display.
The message
On
Power-saving mode will activate if no input signals are detected.
Off
The message
The
DisplayPort.
If
connection. Refer to page 138 for details about connecting source devices.

8.13.6 Lamp Schedule

Enables the lamp value to be adjusted to a user-specified value at a specified time in MDC mode.

8.13.7 OSD Display

Displays or hides a menu item on the screen.
Source OSD
BD Wise is turned On, the picture mode is automatically changed to the
"No Signal" will appear if no source device is connected.
"No Signal" will appear if no input signals are detected.
Standby Control option is only enabled when
"No Signal" is displayed although a source device is connected, check the cable
/ No Signal OSD / MDC OSD
BD Wise through an HDMI cable to the
Source is set to PC, DVI, HDMI
8 System
or
173