Setup Menu - Sanyo VPC-S1415 Instruction Manual

Setup Menu

Set your camera's operating environment.
MENU SET
1. Press the button, and set the camera mode to [
SET
button.
2. Press the
MENU
3. Select the [Setup] at the end of the Menu with the
button.
4. Select the desired option item with the
enter its respective menu.
5. Select the desired setting with the
6. To exit from the menu, press the
Date/Time
Refer to the section in this manual titled "Setting the Date and Time" for further details.
Language
Refer to the section in this manual titled "Choosing the Language" for further details .
Auto Off
If no operation is performed for a specific period of time, the power to the camera is
automatically turned off. This feature is useful for reducing battery usage.
* Off / 1 Min. / 2 Min. / 3 Min.
Beep
This sets whether or not to mute the camera sound each time you press the camera's
buttons.
* On / Off
Display
This sets the image information display state.
* Standard / All / Off
Video Out
This sets your camera to match the system of the equipment that you are going to
connect to the camera.
* NTSC / PAL
MENU
button.
MENU
SET
] or [
/
/ buttons, and press the
/ buttons, and press the
button.
]; or press the 7
buttons, and press the
button to
SET
button.
SET
SET
EN-35