Checking The Remaining Card Memory - Sanyo Xacti VPC-C1EX Instruction Manual

CHECKING THE REMAINING CARD MEMORY

You can check how many images can be captured and how much recording
time is available on the card. For a table showing the maximum number of
images and recording time for specific cards, please see "Possible No. of
Images/Possible Shooting Time/Possible Recording Time" on page 167.
Checking the remaining number of images and
video recording time
1
Set the main switch to REC, and
turn on the power (page 37).
e The remaining number of images
appears in the upper left of the
LCD monitor.
e The remaining video recording time
appears in the upper right of the
LCD monitor.
e The remaining number of images
and video recording time will differ
depending on the resolution and
compression settings.
e When the remaining number of
images or the remaining video
recording time is "0", you cannot
capture any more images. To
capture more images, either install
a new card, or save the images to
a computer (page 129) and then
erase them (page 75) from the
card.
e When the remaining number of images or the remaining video
recording time is "0", it may be possible to capture a few more images
by setting a lower resolution setting (pages 55, 56), or selecting a
different compression setting.
Remaining number of images
Remaining video
recording time
<Still image shooting mode>
English
124